|
ELECTRONIC CONVERSION XKIT
FOR ALIGN TREX 700 NITRO SERIES HELICOPTERS
Item Number: AT700N-XECK
Installation Diagram: CLICK HERE
Models: all ALIGN TREX 700 NITRO versions.
Choose the appropriate Motor Mount Upgrade version for your motor of choice with the pull-down menu at bottom.
Recommended Accessories:
ELECTRONIC PINION SUPPORT UPGRADE
REPLACEMENT LONG SHAFT FOR SCORPION HK-4035 SERIES BRUSHLESS MOTORS
Three motor mount sizes are available, covering the vast majority of motors on the market. Although there are slight
variations between brands, the most common T700E conversion motors are listed below:
M3 x 25 mm:
Plettenberg, Scorpion HK-40XX series, XERA 40XX series, Hacker Brushless Turbine
series
M4 x 25 mm: NEU 19XXH series
Includes:
- One (1) TREX 700 Nitro Aluminum Electronic Conversion Kit
Bottom Bracket Upgrade
- Two (2) M4 x 0.7 x 20 mm Socket Head Cap Screws
(Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers (Zinc-Plated Alloy
Steel)
- Four (4) M3 Flat Washers (Zinc-Plated Alloy Steel)
- Four (4) M3
x 0.5 Nylon-Insert Locknuts (Zinc-Plated Class 8 Alloy Steel)
- One (1) TREX
700 Nitro Aluminum Electronic Conversion Kit Motor Mount Upgrade
M3 x 25 mm
Version Includes:
- Four (4) M3 x 0.5 x 10 mm Socket Head Cap Screws (Class
12.9 BP Alloy Steel)
- Four (4) M3 Flat Washers (Zinc-Plated Alloy
Steel)
M4 x 25 mm Version Includes:
- Four (4) M4 x 0.7 x 10 mm Socket
Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4) M4 Flat Washers
(Zinc-Plated Alloy Steel)
- One (1) TREX 700 Nitro Aluminum Electronic
Conversion Kit Receiver Mount Upgrade
- Eight (8) M2.5 x 0.45 x 14 mm Button
Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- One (1) TREX 700
Nitro Aluminum Elevator Servo Mount Upgrade
- Four (4) M2.5 x 0.45 x 10 mm
Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Four (4)
M2.5 x 0.45 x 14 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy
Steel)
- One (1) TREX 700 Nitro Aluminum Metal Bearing Block Upgrade Set
(Upper and Lower)
- Two (2) Radial Ball Bearings 12 x 24 x 6 mm
- Two (2)
Thrust Ball Bearings 12 x 23 x 7.5 mm
- Two (2) Round Hole Shims 12.1 x 16 x
1 mm
Full Page Descriptions:
TREX 700 Nitro Aluminum Electronic Conversion Kit Upgrade
TREX 700 Nitro Aluminum Elevator Servo Mount Upgrade
TREX 700 Nitro Aluminum Metal Bearing Block Upgrade
|
