|
PERFORMANCE TAIL
CONTROL
FOR ALIGN TREX 550/600 SERIES
HELICOPTERS
Item Number:
AT550/600-PTC-PTU
Installation Diagram: CLICK
HERE
Material: Aluminum 6061-T6
Models: all ALIGN TREX 550E (V1/V2),
600E/ESP, 600E PRO, and 600N (V1/V2) series. Assembly replaces components
of the stock ALIGN Tail Rotor Control mechanism for unparalleled precision and
authority.
Required Components for Proper
Compatibility:
ALIGN Part #H60077A, Metal Tail
Pitch Assembly (included in "V2" kits)
Note: the KDE Direct TREX
550/600 Series Performance Tail Control assembly is the ultimate, slop-free
control system available on the market to provide precise tail control and
authority. With the mechanics of the dual-fork
supported tail slider, there is no worry of abnormal wear or torque loads on the
tail shaft slider for a continuously smooth, failure-free operation even under
the hardest and most extreme flying conditions.
Important: due to the precision CNC-machining
of each component, correct installation is key for proper, bind-free operation.
Please pay attention to the Installation Instructions, take your time
during the install, and make sure to apply medium-strength Loctite (Blue 243 or
equivalent)
to all screws during assembly. Once
fully-installed, a significant reduction in slop throughout the tail mechanics
will be clearly evident on the bench and in actual
flight.
Installation
Diagram
Includes:
- One (1) TREX
550/600 Series Aluminum Performance Tail Control
Assembly
- One (1) TREX
550/600 Series Aluminum Performance Tail Control Secondary Link
- One (1)
TREX 550/600 Series Aluminum Performance Tail Control Primary Link
- One (1)
TREX 550/600 Series Aluminum Performance Tail Control Arm Lever
- One (1)
TREX 550/600 Series Aluminum Performance Tail Control Bearing Holder
- One
(1) TREX 550/600 Series Aluminum Performance Tail Control Bearing Collar
-
Two (2) Radial Ball Bearings 7 x 11 x 3 mm
- Six (6) Flanged Radial Ball
Bearings 3 x 7 x 3 mm
- One (1) M3 x 0.5 x 14 mm Button Head Socket Head Cap
Screw (Class 12.9 BP Alloy Steel)
- Four (4) M3 x 0.5 x 6 mm Button Head
Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- One (1) M2.5 x 0.45 x 6
mm Socket Head Cap Screw (Class 12.9 BP Alloy Steel)
- One (1) M3 x 0.5
Nylon-Insert Locknut (Zinc-Plated Class 8 Alloy
Steel)
- One (1) TREX
550/600/700 Series Aluminum Performance Tail Upgrade V2
- Two (2) TREX 550/600/700 Series
Aluminum Tail Control Link V2
- Two (2) SAE 660 Bronze Bushings 2 x 3 x 3
mm
- Two (2) Radial Ball Bearings 3 x 10 x 4 mm
- Four (4) Flanged Radial
Ball Bearings 2 x 5 x 2.5 mm
- Two (2) M3 x 0.4 x 12 mm Button Head Socket
Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M2 x 0.4 x 8 mm Socket
Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M3 Flat Washers
(Zinc-Plated Alloy Steel)
Finish:
Clear
anodize, mirror-polish CNC gloss
Weight:
8 g (design is FEA optimized for
maximum strength and minimum
weight) |
